Sablon Mesh & Mesh Filter Dengan Bahan Stainless Steel, Polyester dan Nilon. Bahan Cetak Layar
Sablon Mesh & Mesh Filter Dengan Bahan Stainless Steel, Polyester dan Nilon. Bahan Cetak Layar
Detail produk:
Syarat-syarat pembayaran & pengiriman:
|
Bahan: | 316 Stainless Steel | Lebar: | Sebagai persyaratan |
---|---|---|---|
Panjangnya: | Sebagai persyaratan | Warna: | Perak |
Aplikasi: | Saring | Gaya menenun: | Tenunan polos |
Bentuk: | Bulat, persegi, atau sesuai kebutuhan | Nama Produk: | Mesh yang disinter |
Cahaya Tinggi: | sintered stainless steel sheet,sintered metal disc |
500 micron ultra fine stainless steel porous sintered knitted Wire Mesh screen
Description of stainless steel sintered mesh round for filter plate
5-layer sintered stainless steel mesh
It is our standard sintered mesh structure. A single layer of fine wire mesh was placed between two thicker square woven meshes, which were then added to two layers of strong Dutch woven wire mesh and sintered together to form a sturdy board. A single layer of fine wire mesh acts as a filter layer that can be customized to meet specific filtration levels, ranging from 5 microns to 300 microns. It can then be cut and made into a variety of discs, tubes, cartridges and plates.
Filter sintered mesh material
AISI304, AISI304L; AISI316; AISI316L >>Check chemical composition
Special alloy steel Hastelloy, Monel, Inconel and Titanium alloy can be customized according to customer requirements
Filter size
Standard sizes: 500x1000mm, 600x1200mm and 1000x1000mm, 1200x1200mm, and other sizes.
Filtering technology expression
Initial bubble point pressure
The bubble is the minimum pressure required to force the gas to impregnate the porous material Pa through the liquid.
Average aperture
The average pore size as determined by the foam principle, in μm.
Relative permeability coefficient
Unit differential pressure, fluid volume flows through the filter element per unit area, the unit is L / min.cm2.Pa.
Viscous permeability coefficient
Dynamic Viscosity Unit of Fluid When the fluid resistance is formed only by viscous losses, the unit pressure gradient, volume flow rate through the filter element per unit area in m2.
Note: This list for a reference, not for the complete list.
Nomin al filter rating |
structure prodextive layer+control layer +dispersion layer+ reinforce layer+ reinforce layer |
Thickness(mm) | air perm eabilit | Bubble pressure(mm) | weight (kg/m2) |
porosity (%) |
1 | 100+400*2800+100+12*64+64 | 1.7 | 1.81 | 360-600 | 5 layer 8.4 | 40% |
5 | 100+200*1400+100+12*64+64 | 1.7 | 2.42 | 260-550 | 6 layer 14.4 | 40% |
20 | 100+165*800+100+12*64+64* | 1.7 | 4.5 | 170-450 | 40% | |
200 | 40+80+40+20+40+80+40 | 2 | 26 | 50-150 | 40% |
Kontak Person: Gerry Cui
Tel: +8613333017371
Jaring Sablon Stainless Steel 635 Mesh 304 Presisi Tinggi
Elongatation Stainless Steel Wire Mesh Kain rendah OEM / ODM Dapat Diterima
Sablon mesh stainless steel 316 dengan ketegangan tinggi yang digunakan untuk pencetakan kosmetik
Jaring Sablon Poliester Monofilamen Tekstil
200 Mesh Polyester Screen Printing Mesh Untuk PCB
Mesh pencetakan elastisitas rendah Mesh untuk tampilan kristal cair
Ketegangan Tinggi 110 Sablon Mesh
Profesional 110 Monofilamen Polyester Mesh Bolting Cloth Untuk Sablon
Multi Fungsi 110 Screen Printing Mesh Untuk Pencetakan Komponen Elektronik